EN   中文 
TEL :+86(0752)-690 2927

News

You are here : Home  >>  News  >>  Industry Trends  >>  View Details

What is the role of 3D Analog Joystick Sensor?

Date:2018-05-28 17:26:55        Hits:386 
       When talking about the role of the 3D Analog Joystick Sensor?, we first understand the potentiometer.
The potentiometer belongs to the electronic component and is equivalent to a resistor body. There are three
pins, which are adjusted according to a specific rule to reach the resistance value or change the resistance
value by the current. The potentiometer consists of a resistor body and an adjustable brush. When turning or
adjustingthe brush, it will move along the resistor body, and at the same time, the pin output terminal will obtain
the resistance value or voltage (AC voltage or DC voltage) that is related to the displacement amount.
         Everyone is strange for potentiometer, but when it comes to potentiometer industry 3D Analog Joystick Sensor,
LeSen electronics factory thinks that even if you are potentiometer industry people may not know, as far as the outsiders
of the industry would not know The potentiometer itself is a resistor, and the 3D rocker potentiometer consists of two
potentiometers assembled with metal fixtures, rocker (with glue and iron) parts, belonging to the potentiometer package;
Fan is used in the fields of medical equipment, airplane model products, game controllers, and remote control handles.
Here is a simple example to enumerate its role in a certain field.
        Everyone is familiar with the remote control aircraft it has a handle controller, when we play, in order to allow the aircraft
to fly with our will. Then we must control this handle. We can use the control key above the handle to let the aircraft fly in the air.
What can make the aircraft to the left or right, then you have to use potentiometer factory 3D Analog Joystick Sensor, the following
is a small remote control remote control handle, as shown below

3D Analog Joystick Sensor
The 3D Analog Joystick Sensor below the thumb button of the handle controller You can see it from the expanded graph. There is
a similar handle in the middle. We call it the rocker. It is connected with the metal shrapnel and the shrapnel is directly Connected with
multi-turn potentiometers, precisely because he is a combination of firmware so that when we operate, just gently pull the joystick and
it will output the corresponding electrical value with the multi-turn potentiometer output. And angle, the range of angle generally varies
between 20° and 60°. This is just the role and application of 3D Analog Joystick Sensor in remote control aircraft. The role of other
fields is not the same as the equipment and function. Listed one by one, I believe we have a certain understanding of it.